Keo dán kính/Panel 3M Dòng Hybird 4000UV 3M Marine Adhesive/Sealant Fast Cure 4000 UV 06580 295ml
3M Là nhà sản xuất và cung cấp chất kết dính hàng đầu thế giới, cho bạn sự chọn lựa cho giải pháp kế dính, trám trét, bịt kín, khi đông cứng có độ đàn hồi rất tốt,
Chịu được nhệt độ và độ ẩm cao, có độ kết dính cao, hiệu quả mà không cần pha trộn thêm hóa chất cũng như sử dụng công cụ đặc biệt nào. Thích hợp bịt kín các vật liệu như: Kính, Nhựa, SMC, FRP, Kim Loại, Nhôm, Kim Loại Sơn, Gổ…. Các sản phẩm thường dùng bao gồm: - Marine Sealant Fast Cure 4000UV (Dán đầu và đuôi xe bằng vật liệu composite) Features • Superior UV resistance. • Non-corrosive. • Exceptional sealing properties. • Non-cracking. • < 1% VOC’s • Caulkable at low temperatures (>40°F [4°C]). • Low odor. • Fast curing. • Non-shrinking. • Paintable (test for suitability).
Product Description 3M™ Marine Adhesive/Sealant 4000 UV is a one-part adhesive sealant that cures to form a firm, rubbery waterproof seal. Its flexibility allows for the dissipation of stress caused by shock, vibration, swelling or shrinking. Designed for marine applications above and below the waterline. Its superior UV resistance properties makes this an ideal cosmetic adhesive sealant.
3M™ Hybrid Adhesive Sealant Fast Cure 4000 UV is a one-part adhesive sealant that cures to form a firm, rubbery, waterproof seal.
Very High Strength
Excellent UV resistance for glazing applications
Above/Below waterline use
Low VOC
20 minute skin time
Its flexibility allows for the dissipation of stress caused by shock, vibration, swelling or shrinking. Designed for marine applications above or below the waterline. Its superior UV resistance properties make this an ideal cosmetic sealant.
Solar panel installation is almost complete! Just a "quick" wiring job and then we will have up to 200 watts of pure solar energy pulsing through Elise and powering all of her electronics! The power potential is vast making the once remote possibility of refrigeration now a very real probability.
It started with two 20 foot sticks of 316 stainless steel at 150 bucks a pop. With our neighbor Sonny's homemade wooden jig and under his tutelage, we were able to cut and bend the sticks to the appropriate angles.
Sonny and Nathan calculating the bends for the stainless steel.
Two supporting bars were attached to the sides for stability. Then 4 1/4 inch thick aluminium bars were placed under the solar panels for support using 8 more jaw slides for a total of 18 and 10 outside eye ends:
Supporting bar on the port side and one aluminium bar.
Solar Panels Installed!
The next more pressing project had to do with the almost 30 year old leaky knotmeter thru-hull. The new Humminbird thru-hull transducer arrived yesterday and Nathan got right to work so it was out with the old and in with the new!
Old knotmeter/speedometer on the left (blue and white). Black, shiny and new Humminbird Transucer Thru-hull on the right.
Giant hole in Elise's hull once the old knotmeter was removed.
