Mỡ bò nước dạng xịt bôi trơn chịu nhiệt Wurth HHS 2000 500ml

  • wurthhhs2000
175,000

Mỡ bò nước dạng xịt bôi trơn chịu nhiệt Wurth HHS 2000 500ml

Mỡ bò nước dạng xịt bôi trơn chịu nhiệt Wurth HHS 2000 500ml


Công thức đặc biệt với dầu tổng hợp chịu được điều kiện khắc nghiệt, chịu áp lực cao
Tạo một lớp màn bôi trơn đặc biệt chịu được rung động
Khả năng bôi trơn tuyệt vời
Bảo vệ chống ăn mòn bề mặt
Thích hợp với nhiều loại vật liệu
Chịu được nước rò rỉ, nước mặn, axit yếu và kiềm
Không có silicone, không có nhựa và không có axit

Ứng dụng :
Thích hợp cho việc bôi trơn đa dụng và cả trong các trường hợp yêu cầu khắc nghiệt: trong chuyển động, tăng tốc và liên kết ly hợp, cáp Bowden, chân, khớp nối, bản lề, cần lùi, khóa đẩy, kéo kết cuối, thanh trượt, bánh xích, kệ răng và bánh răng mở

Hướng dẫn
Lắc bình trước khi sử dụng, phun vào các bộ phận và để cho nó có hiệu lực một thời gian ngắn. 

 

Partly synthetic oil that is extremely resistant to high pressures

High pressure resistance

Extraordinarily tear-proof lubricating film with excellent noise and vibration dampening

Good creep properties

  • Excellent lubricating properties for small gaps
  • Reliable protection against corrosion

Adhesive

Centrifuge-resistance on turning and rotating parts.

Good material compatibility

Compatible with O-rings/X-rings and plastics. Neutral behaviour on painted substrates.

Resistant to splashed water, salt water, weak acids and alkalis

Silicone-free, resin-free and acid-free

Image

Notice

Resistant to high pressure loads

The HHS 2000 lubricating film remains active and does not strip off despite the high pressure load and shearing motion of the base body. Reliably separates the counterpart-body from the base body and thus ensures optimum wear protection at higher pressure loads. This is only possible for dirt-free lubricating points, which is why we recommend thoroughly and carefully pre-cleaning with HHS Clean, art. no. 089310610, prior to application.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Image

Application :
Suitable for universal lubrication and for high pressure loads, e.g. shifting, accelerator and clutch linkages, Bowden cables, pins, joints, hinges, reversing levers, lock strikers, drag link ends, sliding rails, chain wheels, toothed racks and open gearwheels

Instructions

Shake the can before use, spray the parts and let it take effect briefly. After use, spray the can upside down until it is empty.

ImageImageImage

Thông tin thương hiệu: 

Kết quả hình ảnh cho wurth
About Wurth Australia

We are a family business – Local in every sense.

People and a very special corporate philosophy are the driving forces of the long-standing success enjoyed by the Wurth Group.

Wurth is a family business that was founded by Adolf Wurth in 1945. Prof. Reinhold Wurth, today’s Chairman of the Supervisory Board of the Wurth Group’s Family Trusts, took over the business at the tender age of 19 after his father had passed away and developed it further in to the business that we know and love today. Starting from the early years of the company in post-war Germany, he turned the former two-man business into a dynamic, worldwide operating trading group, generating in excess of EUR 11 billion in the business year of 2015.

From humble beginnings both internationally and locally, Wurth Australia strives to be a leader in its field. June 1982 saw the commencement of operations in a small office located in Braeside, Victoria – with a handful of motivated staff the business focused on delivering high quality products and service to a small number of customers throughout Victoria.

With rapid expansion, several office moves, industry diversification and additional distribution centres, Wurth Australia now proudly employ in excess of 550 people servicing our growing customer base of 46,000. Compared to early days of operation, Wurth Australia now operates in all areas of Australia, from remote regional areas to metropolitan centres.

Bình luận